Battery Problems; Display Problems - Getac V100 User Manual

Battery Problems

The battery does not charge (Battery Charge indicator does not light
orange).
Make sure that the AC adapter is properly connected.
Make sure that the battery is not too hot or cold. Allow time for the
battery pack to return to room temperature.
Make sure that the battery pack is installed correctly.
Make sure that the battery terminals are clean.
The operating time of a fully charged battery becomes shorter.
If you often partially recharge and discharge, the battery might not be
charged to its full potential. Initialize the battery to solve the problem.
(See "Initializing the Battery Pack" in Chapter 3 for instructions.)
The battery operating time indicated by the battery meter does not
match the actual operating time.
The actual operating time can be different from the estimated time,
depending on how you are using the computer. If the actual operating
time is much less than the estimated time, initialize the battery. (See
"Initializing the Battery Pack" in Chapter 3 for instructions.)

Display Problems

Nothing appears on the screen.
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase brightness by
pressing the
The display output might be set to an external device. To switch the
display back to the LCD, press the
display through the settings in Display Properties.
Troubleshooting
hot key.
Fn+F6
+ hot key or change the
Fn F9
8-5