Page 1
A790 USER’S MANUAL Rugged Mobile Computing Solutions...
Page 2
All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.
Page 3
® Please reference ENERGY STAR related information from www.energystar.gov. ® As an ENERGY STAR Partner, Getac Technology Corporation has ® determined that this product meets the ENERGY STAR guidelines for energy efficiency. ® An ENERGY STAR qualified computer uses 70 % less electricity than computers without enabled power management features.
Page 4
® Over its lifetime, ENERGY STAR qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.
Table of Contents Chapter 1 Getting Started ............. 1-1 Getting the Computer Running ..........1-2 Unpacking ................1-2 Connecting to AC Power ............ 1-2 Opening and Closing the Cover ........1-4 Turning On and Off the Computer ........1-5 Taking a Look at the Computer ..........1-6 Front Components ..............
Page 6
Configuring the Display Modes ........2-17 Using the Audio Features ............. 2-18 Connecting Audio Devices ..........2-19 Using the Communication Features ........2-20 Using the LAN ..............2-20 Using the Wireless LAN (Optional) ......... 2-21 Using the Modem ............. 2-23 Using the Wireless Modem (Optional) ......
Page 7
Boot Menu ................5-9 Exit Menu ................5-10 Chapter 6 Installing Software Drivers and Utilities ....6-1 How to Use the Driver Disc ............ 6-2 Installation for Windows XP ..........6-3 Drivers on the First Page ............ 6-3 Drivers on the Second Page ..........6-4 Drivers on the Third Page ..........
Page 8
Solving Common Problems ............ 8-3 Battery Problems ..............8-3 Bluetooth Problems ............8-3 Display Problems ..............8-4 Hardware Device Problems ..........8-5 Hard Disk Drive Problems ........... 8-5 Infrared Problems ............... 8-6 Keyboard, Mouse, and Touchpad Problems ..... 8-6 LAN Problems ..............8-7 WLAN Problems ..............
Chapter 1 Getting Started Congratulations on purchasing this rugged notebook computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: AC adapter (100~240 VAC, 50/60 Hz) ...
Page 11
Power Supply Cord: Alternative: 1. Make sure that the computer is turned off. 2. Plug the DC cord of the AC adapter to the power connector of the computer ( ). 3. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ( ...
Opening and Closing the Cover Open the top cover by pulling on the cover latch and lifting up the cover. You can tilt the cover forward or backward for optimal viewing clarity.
Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button ( 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer power, use the “Shut Down”...
Taking a Look at the Computer Front Components Component Description See Also Top Cover Latch Locks the top cover. P. 1-4 Stereo Speaker Set Sends out sound and voice from the P. 2-18 computer. Handle Allows you to carry your computer for an easy grip.
Rear Components Component Description See Also Power Connects the AC adapter. P. 1-2 Connector USB Ports Each of the two ports connects a USB P. 4-7 device, such as a USB floppy drive, USB flash disk, printer, digital camera, joystick, and more.
Component Description See Also Parallel Port Connects a parallel device, such as a P. 4-3 printer. Serial Port Connects a serial device, such as an P. 4-4 external modem. Kensington Locks the computer to a stationary object P. 7-3 Lock for security.
Component Description See Also Microphone Connects an external microphone. P. 2-19 Connector IEEE 1394B Port Connects a 1394B device such as a mass P. 4-8 storage device, digital video (DV) camcorder, or a digital audio device. Hard Disk Drive Contains the hard disk drive of your P.
Top-open Components Component Description See Also LCD Screen Displays the output of the computer. P. 2-16 Can also have the optional touchscreen P. 2-12 function. Indicators Show the current status of the computer’s devices.
Page 19
Component Description See Also Scroll Lock indicator P. 2-4 Caps Lock indicator P. 2-4 Num Lock indicator P. 2-5 Hard disk drive in-use indicator P. 2-13 Battery charge indicator – P. 3-3 Glows green when the battery is fully charged and connected to AC power. Glows amber (orange) when the battery is being charged.
Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer.
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk.
Page 23
To stop in this Do this... To start up or mode... resume again Standby/Sleep Depending on your settings in Press any key. Windows, you can place the computer in Standby/Sleep mode by: Closing the display cover Pressing the Fn+F12 hot key ...
Using the Keyboard Fn+F8 Your special shower-proof and dust-proof rubber keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys ...
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs.
Page 27
Description Switches the wireless LAN radio on and off. NOTE: This function works only if an optional mini PCI-E wireless LAN card is installed. The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety.
Description NOTE: When in full screen DOS mode, or when playing DVD or MPEG file, display switching is not allowed. If the display mode is set to 256 colors or lower, or in DOS mode, there will be only two modes for selecting: CRT only and LCD &...
Using the Touchpad The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad (work surface) and a left and right buttons.
Page 30
Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or–...
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.
Using the Touchscreen (Optional) The screen of your computer is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included touchscreen pen to communicate with the computer. Here are some common terms that you should know when using the touchscreen: Term Action...
Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored.
Page 34
4. Remove the two screws securing the hard disk drive compartment. 5. Lift up the handle and pull on it to remove the hard disk drive compartment. 6. Remove the two screws securing the hard disk drive to the compartment and remove the steel plate cover.
Page 35
7. Lift up the hard disk drive from the compartment and replace it with a new one. 8. Replace the steel plate cover and replace the two screws to secure the hard disk drive to the compartment. 9. Replace the hard disk drive compartment to the computer and secure with two screws.
Using the Video Features The video subsystem of your computer features: 12.1/14.1-inch TFT (Thin-Film Transistor) color LCD display with 1024 × XGA (eXtended Graphics Array) resolution, or optional 14.1-inch TFT (Thin-Film Transistor) color LCD display with 1400 1050 SXGA+ / SXGA (Super eXtended Graphics Array) resolution ×...
Configuring the Display Modes Your computer has been set to a default resolution and number of colors before shipment. You can view and change display settings through your operating system. See your operating system documentation or online help for specific information. For displaying in higher resolutions, you can connect an external CRT monitor that supports higher resolutions.
Using the Audio Features The audio subsystem of your computer features: External audio connectors ( ) A set of speakers ( ) Ways of playing and recording sound vary with the operating system used. See your operating system documentation or online help for specific information.
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector ( ) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set. ...
Using the Communication Features Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.
Using the Wireless LAN (Optional) Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment.
Page 42
Connecting to a Wireless Network (Getac Pre-installed Windows XP Only) To connect to a wireless network: 1. Make sure that the WLAN radio is on (controlled by Fn+F1). 2. Click Start All Programs Intel PROSet Wireless Intel PROSet Wireless.
Using the Modem The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.
Using the Wireless Modem (Optional) Depending on your model, your computer includes an integrated GSM (Global System for Mobile Communications) / GPRS (General Packet Radio Service) feature. After you establish a subscription with a GSM/GPRS service provider, you can use the wireless data features of your computer. Check with your service provider for a list of available wireless data services.
Connecting Using GPRS Your computer can receive General Packet Radio Services (GPRS), a high-speed data-only service that transmits data over a mobile telephone network. In addition, GPRS provides permanent on-line connection. To use GPRS, you must have a subscription to the function with a service provider that supports GPRS.
Connecting to another Bluetooth Device 1. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 2. Double-click the icon, then click New Connection or click Bluetooth, then Add New Connection .
Page 47
4. Select the device to connect to and click on Next. 5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. Sending a File 1. Right-click the icon, and then click Wireless File Transfer. The following screen appears.
Using the GPS Feature (Optional) GPS (Global Positioning System) is a constellation of 24 well-spaced satellites that orbit the Earth and make it possible for devices enabled with GPS receivers to pinpoint their location. You need to install third-party GPS navigation software to take advantage of the GPS feature.
Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power.
Battery Pack NOTE: The battery pack is not charged upon purchasing the computer. Make sure the computer is turned off and charge it for at least 8 hours before using it for the first time. Charging automatically starts when the AC adapter is plugged in to the computer.
To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator ( ) on the computer glows amber to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged.
1. Make sure the computer power is turned off. Connect the AC adapter to fully charge the battery pack. 2. After the battery pack is fully charged, turn on the computer. 3. Disconnect the AC adapter and leave the computer on until the battery is fully discharged.
Page 54
3. Remove the two screws securing the battery pack to the computer. 4. Lift up the handle and pull on it to slide the battery pack off the computer. 5. Slide the front panel off the battery pack and replace it on a new battery pack.
6. Slide the new battery pack into the computer. 7. Replace the two screws to secure the battery pack on the computer. Battery Low Signals and Actions When the battery is low, Windows gives warning messages and the Battery Charge Indicator ( ) blinks amber (orange) to alert you.
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time.
Hibernation Mode Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications.
Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. ...
Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.
Connecting a Parallel Device Your computer has a parallel port for connecting a parallel device such as printer. The port supports ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes that turn the standard parallel port into a high-speed bi-directional peripheral port. Follow this procedure to connect a parallel device: 1.
Connecting a Serial Device Your computer has a serial port for connecting a serial device such as a serial mouse or modem. Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2. Plug the device cable to the serial port on the rear of the computer. 3.
Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared- equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). When using the IR port of your computer to receive data: Place the transmitting device where its IR port faces the IR port of your computer within the effective range ...
Connecting a USB Device Your computer has two USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. To connect a USB device, simply plug the device cable to one of the USB ports.
Connecting an IEEE 1394B Device Your computer has an IEEE 1394B port for connecting IEEE 1394B devices. IEEE 1394B is the next-generation serial bus standard, featuring high-speed data transfer that doubles the throughput of the original IEEE 1394A interface (from 400 Mbit/sec to 800 Mbit/sec) and dramatically increases the maximum distance of connections (up to 15 feet away, while a FireWire 800 optical repeater will connect devices up to 1000 meters (3300 feet) away).
Using PC Cards Your computer has a PC card slot that can accommodate two type II cards or a type III card that supports CardBus specifications. Type II cards are typically used for I/O devices such as data/fax modems, LANs, and mass storage devices.
Page 68
2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process.
System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin DDR2 SO-DIMM slots. However, to avoid damage during the installation procedure, please ask your dealer for help.
Chapter 5 Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.
BIOS Setup When to Use BIOS Setup When to Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. ...
The BIOS Setup Utility screen can be divided into four areas: On the top is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The left column of the menu displays the menu items. ...
Function , Selects a menu title. , Selects an item or option. + / – Changes the value. Enter 1) Brings up the sub-menu when available. 2) Opens or closes the option window when an item is selected.
Page 75
System Date sets the system date. IDE Channel 0 Master/Slave / SATA Port 1/2 upon pressing Enter the following screen appears: User Type sets the type of storage device installed. The options are Auto CD-ROM ATAPI Removable None IDE Removable Other , and ATAPI...
Advanced Menu The Advanced menu contains the advanced settings as shown next. Serial/Parallel Port Configuration upon pressing Enter the following screen appears. Serial Port A/B/C/D enables the serial port.
Page 77
Parallel Port enables the parallel port. IrDA Serial Port C Mode sets the mode. The options are Touchscreen Bi-directional Output Only , and Base I/O Address sets the base input/output address. DMA Channel sets the DMA channel for the IR port. This item only appears when the above item is set at Japanese Keyboard enables support for the Japanese keyboard.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Supervisor/User Password Is shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User Password sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press Enter.
Password on Boot enables the system to require a password upon boot-up. TPM Support enables TPM support. TPM is a component on your computer’s mainboard that is specifically designed to enhance platform security above-and-beyond the capabilities of today’s software by providing a protected space for key operations and other security critical tasks.
Function , Selects (highlight) a boot device. +, – Changes the boot sequence. 1 to 4 Loads the default boot sequence. f or r Specifies if the device is fixed (f) or removable (r). Moves the highlighted boot device from the “Boot priority order”...
Page 81
Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made.
Chapter 6 Installing Software Drivers and Utilities To take full advantage of the unique features of your computer, drivers and utilities must be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers and utilities. If not, you need to install them using the disc supplied with your computer.
How to Use the Driver Disc An autorun program is provided on the driver disc to help you easily install the drivers. As you insert the disc, the autorun program automatically starts. If you need to start the program manually, run the Autorun.exe program from the driver disc.
Installation for Windows XP After selecting the operating system Windows XP, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. Drivers on the First Page Item Description Device Driver Ensures the full function of the following drivers.
Item Description Installs the TPM driver/utility for using the TPM (Trusted Platform Module) support for security. BAY-2 Driver Installs the driver for using an extra battery pack or (option) wireless modem (GPRS/GSM, CDMA) module on the Bay 2 slot. Drivers on the Second Page Item Description Vehicle Dock/...
Item Description GPS (option) Installs the GPS driver for using the GPS feature. The instructions for installing the GPS driver will appear. See “GPS Driver” for further instructions. Bluetooth Installs the Bluetooth driver/utility for using the (option) Bluetooth feature. WCDMA Installs the WCDMA driver and application for using the (option) 3G feature.
Page 88
Item Description Bay 2 SCSI Installs the SCSI driver for using the optional SCSI device (option) in the Bay 2 slot. Bay 2 Smart Card Allows you to use a Smart Card reader on the Bay 2 slot. (option) Installs the OSD (on screen display) utility that provides a graphic display to indicate the current status of certain operations.
Installation for Windows Vista After selecting the operating system Windows Vista, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. Drivers on the First Page Item Description Chipset Ensures the full function of the other drivers.
Item Description WLAN Installs the WLAN driver/utility for wireless network connection. Touch Screen Installs the touchscreen driver/utility for using the touchscreen feature. Drivers on the Second Page Item Description Installs the TPM driver/utility for using the TPM (Trusted Platform Module) support for security. BAY-2 Driver Installs the driver for using an extra battery pack or (option)
Item Description Vehicle Dock/ Brings up a submenu as Port Replicator shown on the right. Video Installs the video capture Capture driver. (option) Installs the USB-to-COM USB-to-COM driver. (option) GPS (option) Installs the GPS driver for using the GPS feature. The instructions for installing the GPS driver will appear.
Page 92
Item Description Bluetooth Installs the Bluetooth driver/utility for using the (option) Bluetooth feature. Fingerprint Installs the fingerprint driver/utility for using the finger print feature. Bay 2 Smart Card Allows you to use a Smart Card reader on the Bay 2 slot. (option) Installs the OSD (on screen display) utility that provides a graphic display to indicate the current status of certain...
Installation for Windows 7 After selecting the operating system Windows 7, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. Drivers on the First Page Item Description Device Driver- Ensures the full function of the other drivers.
Item Description Vehicle Dock/ Brings up a submenu as Port Replicator shown on the right. Video Installs the video capture Capture driver. (option) Installs the USB-to-COM USB-to-COM driver. (option) Drivers on the Second Page Item Description Installs the TPM driver/utility for using the TPM (Trusted Platform Module) support for security.
Page 95
GPS (option) Installs the GPS driver for using the GPS feature. The instructions for installing the GPS driver will appear. WCDMA Installs the WCDMA driver and application for using the (option) 3G feature. Bluetooth Installs the Bluetooth driver/utility for using the (option) Bluetooth feature. Getac-Utility Installs the Getac utility.
Drivers on the Third Page Item Description Module Switch Allows you to use the switch module feature. OSD-32bit/64bit Installs the OSD (on screen display) utility that provides a graphic display to indicate the current status of certain operations. Select the 32-bit or 64-bit option according to your Windows 7 version.
More Driver Installation GPS Driver (for Windows XP Only) To complete the GPS driver installation, perform the following: 1. Insert the driver disc into the optical drive. 2. Click Start Run. 3. Enter the driver path and file name (e.g., g:\GPS\PL-2303 Driver Installer_GPS.exe), then click OK.
Using Special Utilities Touchscreen Utility After installing the touchscreen driver/utility, you can use PenMount Monitor to configure your touchsreen. 1. Cick the PenMount Monitor icon located on the system tray bring up the PenMount Control Panel. 2. Click Standard Calibration. 3.
OSD for Hot Key Operations With the OSD driver installed, it is activated every time Windows starts up. A graphic display will appear on the screen to indicate the current status when you perform a hot key operation (as listed next). The OSD disappears after a few seconds.
Chapter 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files.
Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table.
Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended temperature is between 0 C (32 F) and 55 C (131 F) – actual operating temperature depending on product specifications. Avoid placing the computer in a location subject to high humidity, ...
a screen saver or other software that prevents the power management from working. Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth.
It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the computer’s power off. To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the computer and with 30 % ~ 40 % charge remaining.
Page 107
To remove hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation. ...
When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. ...
Chapter 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the ...
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light yellow). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the ...
Make sure that the other device is not in “Hidden” mode. Make sure that both devices are compatible. I cannot end a Bluetooth connection. If another device is connected to your computer, you can either end the connection using the other device or by deactivating Bluetooth.
Resolution cannot be adjusted to desired setting. Make sure that the VGA driver is installed correctly. The external monitor displays nothing. Make sure that the monitor is turned on. Make sure that the monitor’s signal cable is properly connected. ...
The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. The hard disk drive in-use indicator glows without blinking. The data files stored on the hard disk drive may be fragmented.
The numeric keypad is disabled. Make sure that the Num Lock is switched on. (Check if the Num Lock Indicator glows or not.) The external keyboard does not work. Make sure that the keyboard cable is properly connected. The USB mouse does not work.
Page 116
Transmission quality is poor. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the ...
Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the necessary driver(s) is correctly installed. Make sure that the network configuration is appropriate.
Power Management Problems The computer does not enter Standby/Sleep or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Standby/Sleep or Hibernation mode if the connection is actively in use. Make sure that the Standby/Sleep or Hibernation time-out is enabled. ...
Make sure that the printer’s signal cable is properly connected. Make sure that the printer driver is correctly installed. Make sure that you have assigned the printer port correctly in your operating system or application program. The printer prints garbled information. Make sure that the printer driver is correctly installed.
The sound system does not record. Adjust the playback or recording sound levels. The external microphone or audio device does not work. Make sure that the microphone is connected to the proper connector on the computer. Make sure that your computer is equipped with the driver needed. ...
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data.
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel Yonah processor (processor no. x48), µFC-BGA package, dual core low voltage, 1.66 GHz; Front Side Bus (FSB) 667 MHz, 15 W thermal ceiling Core logic Intel 945GM (Calistoga) chipset + ICM7-M Cache memory L2 2 MB on-die...
Page 124
Parts Specifications Hard disk drive (removable) 2.5-inch, 9.5 mm height, Ultra DMA 100 / SATA 160 (option) support, built-in G-sensor and heater for low temperature –20 °C (option) I/O ports Serial port, parallel port, IEEE 1394B port, two USB ports, IR port, port replicator, RJ-45 port, RJ-11 port, fingerprint sensor (option)
On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Page 128
FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer.
paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. ...
On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 131
The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated ...
Page 132
EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.
shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.
Page 134
Icelandic Þessi vara stenst reglugerð Evró pska Efnahags Bandalagsins nú mer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
Page 135
Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “Turning Off the Wireless LAN Radio.” France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France.
Page 136
Frequency Ranges Indoors Outdoors (MHz) 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.