When And How To Use Bios Setup; When To Use; Starting Bios Setup - Getac V100 User Manual

When and How to Use BIOS Setup

When to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS
Setup Utility.
You want to restore the factory default settings.
You want to modify some specific settings according to the hardware.
You want to modify some specific settings to optimize the system
performance.

Starting BIOS Setup

NOTE:
The BIOS Setup Utility screens shown in this chapter are for your reference only.
The actual items or settings on your computer may differ.
The BIOS Setup Utility program may have been updated after the publication of this
manual.
The settings you select in your operating system might override similar settings in
BIOS Setup Utility.
To run BIOS Setup Utility, press the
button when the prompt appears on the screen during system startup. The
prompt shows up on the screen for only a few seconds. You must press
the key or click the left touchpad button quickly. A small window
Enter
appears, select Launch System Setup. The BIOS Setup Utility main
screen appears as shown next.
Using BIOS Setup
Enter key or click the left touchpad
5-2