Group Measuring Values - Endress+Hauser Proline t-mass 65F Manual

2 Group MEASURING VALUES

8
2 Group MEASURING VALUES
Function description MEASURING VALUES
!
Note!
The engineering unit of the measured variable shown here can be set in the SYSTEM UNITS group (see Page 9).
MASS FLOW In this function, the currently measured mass flow appears on the display.
Display:
5-digit floating-point number, including unit
(e.g. 150.00 kg/h; 330.70 lb/h; etc.)
CORRECTED VOLUME In this function, the currently measured corrected volume flow appears on the display.
FLOW The calculated corrected volume flow is derived from the measured mass flow and the
reference density of the gas (at reference temperature and pressure).
User Interface:
5-digit floating-point number, including unit
(e.g. 104.97 Nm
TEMPERATURE In this function, the currently measured gas ambient temperature appears on the display.
Display:
5-digit floating-point number, including unit and sign
(e.g. –23.4 °C; +160.0 °F; 295.4 K; etc.)
Device Functions Proline t-mass 65
3 3
/h; 110.73 Sm /h; etc.)
Endress+Hauser