HP A7500 Series Configuration Manual page 20

# Specify an IP address for VLAN-interface 10.
<Switch> system-view
[Switch] vlan 10
[Switch-vlan10] port GigabitEthernet 1/4/0/2
[Switch-vlan10] port GigabitEthernet 2/4/0/3
[Switch-vlan10] quit
[Switch] interface vlan-interface 10
[Switch-Vlan-interface10] ip address 16.1.1.1 255.255.255.0
[Switch-Vlan-interface10] quit
# Specify an IP address for VLAN-interface 20.
[Switch] vlan 20
[Switch-vlan20] port GigabitEthernet 2/3/0/1
[Switch-vlan20] port GigabitEthernet 1/3/0/4
[Switch-vlan20] quit
[Switch] interface vlan-interface 20
[Switch-Vlan-interface20] ip address 10.0.0.1 255.255.255.0
[Switch-Vlan-interface20] quit
# Disable the ARP entry check function.
[Switch] undo arp check enable
# Configure a static multicast MAC address entry.
[Switch] mac-address multicast 03bf-1001-0164 interface GigabitEthernet 1/4/0/2 Gigabi
tEthernet 2/4/0/3 vlan 10
Verification
NLB load sharing: Enable the FTP server function of Server A and Server B. Host A and Host B send
•
requests to the virtual IP address and each of them logs in to a different server.
NLB redundancy: Disable the network interface card of Server A. Host A and Host B send requests
•
to the virtual IP address and both log in to the FTP server on Server B.
12