Advertisement
Last update: 2017-07-19 14:55
The menu lists every meter found. And in the gray box at the right side it shows the configured
function.
After selecting a meter, see its detailed settings:
5. Multiple Energy Meters in one system
There are 3 options to connect multiple Energy Meters:
1.
Each wired to a separate RS485-USB converter. Which are then each plugged into a separate USB
socket on the CCGX.
2.
2 meters wired on to one RS485-USB converter. In this case the modbus address of the additional
meter needs to be changed, so each is unique. See chapter 6.
3.
Wireless connection: the additional meter is connected to an additional Zigbee to RS485
converters. There is then no second Zigbee to USB interface required. It is necessary to change of
the modbus address of one of the AC sensors, see chapter 6.
Besides adding an extra sensor, it is also possible, in a single phase installation, to use the, unused,
https://www.victronenergy.com/live/
energy-meters:em24 https://www.victronenergy.com/live/energy-meters:em24
Printed on 2017-08-15 16:55
Advertisement
