Advertisement
Last update: 2017-07-19 14:55
power from the CCGX, so the CCGX needs to be switched on as well).
Step 2.
Connect the Zigbee to RS485 converter to the EM24 energy meter:
Zigbee Converter Energy meter
GND
Terminal 43
A
Terminal 42
B
Terminal 41
Step 3.
Make sure only one Zigbee device is powered up right now: the Zigbee to USB converter connected to
the CCGX. Power down all others. If you don't do this, the Zigbee to RS485 converter may be
connected permanently to another Zigbee device.
Step 4.
https://www.victronenergy.com/live/
energy-meters:em24 https://www.victronenergy.com/live/energy-meters:em24
Printed on 2017-08-15 16:55
Advertisement
