Advertisement
2017-08-15 16:55
Connect the 12V DC power supply to the Zigbee to RS485 converter. When the power is switched on,
check the LEDs again.
Option B: Wired connection to CCGX
Connect the Energy Meter to the CCGX with an USB to RS485 cable (see our price list). The RS485 to
USB interface cable between the CCGX and the Energy Meter can be extended up to 100 meters;
make sure that the extensions of the Data+ (orange) and Data- (yellow) wires form a twisted pair.
RS485 Converter Energy meter
Yellow
Terminal 41
Orange
Terminal 42
Black
Terminal 43
The red, green and brown wire coming out of the USB to RS485 cable are not used
4. Configuration
After proper connection and powering up, the meter will be visible on the CCGX in the Settings →
Energy Meters menu:
Victron Energy - https://www.victronenergy.com/live/
5/7
Energy Meter EM24 manual
Advertisement
