Download  Print this page

Attach Bracket/Install Radio - Uniden CMX660 Owner's Manual

Professional mobile cb radio
Hide thumbs


2. Use the screws provided to fasten the guide
rails into position on the radio.

Attach Bracket/Install Radio

Using the screws provided, screw the
bracket into a stable, level surface. If
mounting the radio in a vehicle, for example,
screw the bracket onto the top of the
dashboard or underneath the dashboard.
Be sure the words "FRONT-SLIDE IN" are
visible from the front of the bracket.
Be sure you do not mount the bracket where
the screws can damage any wiring or
hardware. Move the wiring/hardware out of
the way or relocate the radio bracket.
2. Slide the back of the radio into the bracket
until the slide mounts latch and click into
You can flip the display so that the indicators
appear right-side-up, no matter the
installation orientation (see "page 28).
(2 on each rail)
Slide Mount Latch
(1 on each rail)
L-Tab Slot
(2 on each side)



  Related Manuals for Uniden CMX660