Hilti AG 230-27DB Operating Instruction
Hide thumbs
Also See for AG 230-27DB:
- Original operating instructions (268 pages) ,
- Original operating instructions (204 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Hilti AG 230-27DB
Summary of Contents for Hilti AG 230-27DB
- Page 1 AG 230-27DB English Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 2 Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 3 1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
- Page 4 1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
- Page 5 ▶ Prevent unintentional starting. Ensure the switch is in the off‐position before connecting to power source, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. ▶...
- Page 6 ▶ Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations.
- Page 7 ▶ Wheels must be used only for recommended applications. For example: do not grind with the side of cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter. ▶ Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage.
- Page 8 3 Description 3.1 Product overview English Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 9 The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with the corresponding guard (optional accessory). • A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral materials such as concrete or stone. 3.3 Items supplied Angle grinder, guard, side handle, clamping flange, clamping nut, wrench and operating instructions.
- Page 10 3.9 DC-EX 230/9" dust hood for cutting, with carriage (accessory) The power tool may be used for cutting and slitting work on mineral materials only when fitted with a dust hood. CAUTION Use of this hood for working on metal is prohibited. 3.10 Guard with cover plate (accessory) When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use the guard with cover plate.
- Page 11 The operating voltage of the transformer or generator must always be within +5% and -15% of the rated voltage of the device. AG 230-27DB Rated speed...
-
Page 12: Operation
6 Operation 6.1 Preparations at the workplace CAUTION Risk of injury! Inadvertent starting of the product. ▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories. Observe the safety instructions and warnings in this documentation and on the product. 6.2 Fitting the side handle ▶... - Page 13 6.3.2 Adjusting the guard or guard with cover plate 1. Release the clamping lever. 2. Rotate the guard to the required position. 3. Secure the guard by closing the clamping lever. 6.3.3 Removing the guard 1. Release the clamping lever. 2.
- Page 14 6.4.1 Fitting an accessory tool 1. Disconnect the supply cord plug from the power outlet. 2. Clean the clamping flange and the clamping nut. 3. Check that the O-ring is in place in the clamping flange and that it is undamaged. Result The O-ring is damaged.
- Page 15 6.4.3 Fitting an accessory tool secured with a Kwik lock nut CAUTION Risk of breakage. Heavy wear (abrasion) may cause the Kwik lock nut to break. ▶ When working with the power tool, make sure that the Kwik lock nut doesn’t come into contact with the working surface.
- Page 16 6.4.4 Removing an accessory tool secured with a Kwik lock nut 1. Disconnect the mains plug from the power outlet. CAUTION Risk of breakage and irreparable damage. If the spindle lockbutton is pressed while the spindle is rotating, this may cause the accessory tool to work loose or detach from the power tool. ▶...
- Page 17 6.6.2 Rough grinding CAUTION Risk of injury. The abrasive cutting disc could shatter and flying fragments may cause injury. ▶ Never use abrasive cutting discs for grinding. ▶ Move the power tool to and fro while maintaining a 5° to 30° angle of attack and applying moderate pressure.
-
Page 18: Troubleshooting
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information. - Page 19 11 Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. English Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 20 English Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 21 Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
- Page 22 Hilti = registered trademark of Hilti Corp., Schaan 20170912 Printed: 26.09.2017 | Doc-Nr: PUB / 5376185 / 000 / 00...
Need help?
Do you have a question about the AG 230-27DB and is the answer not in the manual?
Questions and answers