Table of Contents
Advertisement
Deciding On an Installation Site
Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident,
fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
Unsuitable Installation Sites
➢ Locations subject to large fluctuations in temperature or humidity
➢ Locations subject to shaking or vibration
➢ Locations where the floor is tilted, not level, or unstable
➢ Dusty locations
➢ Locations exposed to direct sunlight or near air-conditioning or heating equipment
➢ Locations exposed to water or moving air
➢ Locations exposed to considerable electrical or magnetic noise, or other forms of electromagnetic energy
Install the machine in a location that is level, stable, and able to bear the weight of
the machine.
This machine weighs approx. 455 kg (up to approx. 600 kg (1350 lb.), including media and the
like). Installation in an unsuitable location may cause a major accident, including tipover, fall, or
collapse.
Never install in a location exposed to water or to gasoline, thinner, or any other
flammable material.
Current leakage may cause electrical shock, electrocution, or combustion and fire.
Never place gasoline, alcohol, thinner, or any other flammable material near the
machine. Also, never use an aerosol spray near the machine.
Doing so may cause fire.
Never operate in a location such as one near an open flame or heater, or where
sparking or static electricity may occur.
Ink or the like may ignite and cause fire.
Install in a clean, brightly lit location.
Working in a location that is dark or cluttered can be hazardous. Operations in such locations
may cause an accident, such as tripping and becoming pinned under the roll media.
Install in a location that can be ventilated.
Odor from ink and the like may cause physical distress, or may cause to fire.
1. Installation
21
Advertisement
Table of Contents
