Connecting The Cables - Roland SolJet Pro II SJ-1000 Setup Manual

Table of Contents

Advertisement

4. Attaching the Included Items and Connecting the Cables

Connecting the Cables

WARNING
WARNING
CAUTION
Electrical outlet:
200 to 240 V, 10 A or more
Power cord
28
Do not use with any electrical power supply that does not meet the ratings dis-
played on the unit.
Use with any other power supply may lead to fire or electrocution.
Ground the unit with the ground wire.
Failure to do so may result in risk of electrocution in the event of a mechanical problem.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Ethernet (100Base-TX recommended)
Ethernet cable (Category 5 or higher)
Never insert a telephone cable.
Take care to ensure no contact
with the media or rollers.

Advertisement

Table of Contents
loading

Table of Contents