Related Manuals for Insignia NS-WB44SS8
Summary of Contents for Insignia NS-WB44SS8
-
Page 1: User Guide
USER GUIDE Built-in 4.9 Cu. Ft. Wine Cooler NS-WB44SS8 Before using your new product, please read these instructions to prevent any damage. -
Page 2: Table Of Contents
ONE-YEAR LIMITED WARRANTY ........22 Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-WB44SS8 represents the state of the art in wine cooler design and is designed for reliable and trouble-free performance. www.insigniaproducts.com... -
Page 3: Important Safety Instructions
Built-in 4.9 Cu. Ft. Wine Cooler Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your cooler. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your cooler. - Page 4 NS-WB44SS8 WARNING Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death. 1 WARNING–Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction. 2 WARNING–Do not touch the interior of the chiller compartment with wet hands.
-
Page 5: Features
Built-in 4.9 Cu. Ft. Wine Cooler 12 This cooler is intended to be used in household and similar environments. 13 Do not store or use gasoline or any flammable liquids inside or in the vicinity of this cooler. 14 Do not use extension cords or ungrounded (two prong) adapters with this cooler. -
Page 6: Components
NS-WB44SS8 Components Interior light Electric Zone Partition partition gasket Control panel and display Wood shelves Tempered glass door Notes • For your cooler to operate normally, avoid placing it in areas with high magnetic fields or high humidity. • When you put a lot of wines in the cooler at one time, the temperature in the cooler may rise temporarily. -
Page 7: Control And Display Panel
Built-in 4.9 Cu. Ft. Wine Cooler Control and display panel Lower zone Upper zone Upper zone Lower zone temperature temperature Upper zone Lower zone display display buttons buttons indicator Power button Light button indicator BUTTON FUNCTION Press to turn the interior light on or off. Left side - press to raise the temperature in the upper zone. -
Page 8: Setting Up Your Wine Cooler
NS-WB44SS8 Setting up your wine cooler Before using your cooler • Remove the exterior and interior packing. • Let the cooler stand upright for approximately four hours before connecting it to power. This reduces the possibility of a malfunction in the cooling system from improper handling during transportation. -
Page 9: Building In Your Wine Cooler
Built-in 4.9 Cu. Ft. Wine Cooler Building in your wine cooler The cutout dimensions shown in the following graphic allow the door to swing open and provides access to the pull-out shelves when installed as a built-in unit. Power outlet 24”... -
Page 10: Reversing The Door
NS-WB44SS8 Reversing the door You will need a 10 mm socket wrench and a Phillips screw driver. Have someone available to assist you in the process. • Keep all of the parts you remove to reuse them later. • Removing the door requires that the cooler be tilted backwards. - Page 11 Built-in 4.9 Cu. Ft. Wine Cooler 10 Move the hinge pin from the right hole of the hinge to the left hole. 11 Remove the screw on the left side of the cabinet, this screw will be used to attach the door hinge to the cabinet. 12 Install the bottom hinge on the left bottom of your cooler using the screws you previously removed.
-
Page 12: Grounding Requirement
NS-WB44SS8 18 Install the screw covers previously removed from the left holes to the right holes of the cabinet. 19 Adjust the leveling feet to level the cooler Grounding requirement This cooler must be grounded. This cooler is equipped with a cord having a grounding wire with a grounding plug. -
Page 13: Using Your Wine Cooler
Built-in 4.9 Cu. Ft. Wine Cooler Using your wine cooler Turning on your cooler Press the button to turn your cooler on. The display screen and indicators blink for three seconds and an audible beep will be heard, then the compressor starts working. You can manually set your unit to “Standby”... -
Page 14: Understanding The Dual Temperature Zones
NS-WB44SS8 Understanding the dual temperature zones There are two temperature zones in this appliance. They are divided by a partition. • Each zone has its own independent temperature control and display. • Each zone can be used to store wine bottles. - Page 15 Built-in 4.9 Cu. Ft. Wine Cooler Arranging bottles for maximum storage All small bottles (2 31/32“ or smaller) Large (over 2 31/32”) and small bottles If you will only be storing smaller bottles, we suggest that you use the “All small bottles”...
-
Page 16: Lighting Your Cooler
NS-WB44SS8 Cabernet (750 ml Boutique) 3 1/8” Small Champagne 3 3/16” Burgundy 3 1/4” Pinot Noir (Large Pinot) 3 3/8” Champagne Racking Bottle width Will it fit? Bordeaux 2 7/8” Cabernet (750 ml Boutique) 3 1/8” Small Champagne 3 3/16”... -
Page 17: Arranging Your Wine
Built-in 4.9 Cu. Ft. Wine Cooler Arranging your wine In order to maintain good air circulation in the cooler, do not let the bottles touch the back of the cooler. Serving and storage tips We suggest that you pour wine at a temperature below the ideal serving temperature, because the wine warms up quickly after it’s been poured into a glass. - Page 18 NS-WB44SS8 Locking and unlocking your wine cooler The lock is designed to prevent the settings of your wine cooler from being changed accidentally. With the lock engaged, in order to adjust any of the settings you must unlock the control panel by pressing and holding buttons simultaneously for approximately three seconds.
-
Page 19: Maintaining Your Wine Cooler
Built-in 4.9 Cu. Ft. Wine Cooler Maintaining your wine cooler Your cooler is designed for year-round use with only minimal cleaning and maintenance. When you first receive it, wipe the cabinet with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your cooler looking new. -
Page 20: Moving Your Wine Cooler
NS-WB44SS8 Moving your wine cooler 1 Turn off the cooler and unplug it from the wall outlet. 2 Remove all wine/beverages. 3 Securely tape down all loose items inside your cooler. 4 Tape the door shut. Make sure that the cooler stays in the upright position during transportation. -
Page 21: Specifications
Built-in 4.9 Cu. Ft. Wine Cooler PROBLEM SOLUTION The cooler door does not close • Adjust the shelf properly. completely. • Clean the door gaskets. • Level the cooler with the leveling feet. The cooler is not cold enough. • Make sure that the door is closed properly. •... -
Page 22: One-Year Limited Warranty
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. - Page 23 Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults” •...
- Page 24 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC V1 ENGLISH 7601 Penn Ave South, Richfield, MN 55423 U.S.A 17-0586 ©2017 Best Buy. All rights reserved.