Insignia NS-WB44SS8 User Manual page 11

10 Move the hinge pin from the right hole of the hinge to the left hole.
11 Remove the screw on the left side of the cabinet, this screw will be
used to attach the door hinge to the cabinet.
12 Install the bottom hinge on the left bottom of your cooler using the
screws you previously removed. Tighten the screws.
13 Take out the left stopper, found in the bag with the manual, then
attach the hinge pin sleeve and left stopper to the bottom of the left
door.
14 Align the hole at the bottom left of the wine cooler door with the
bottom hinge pin, then install the door on the hinge pin.
Left stopper
15 Place the top hinge pin into the top of the cooler door, then install the
top hinge on the top left of the cooler with the screws you previously
removed.
16 Check the fit and alignment (vertical and horizontal) of the door and
make sure that it opens and closes freely, then tighten the screws
holding the top hinge.
17 Install the hinge cover.
www.insigniaproducts.com
Built-in 4.9 Cu. Ft. Wine Cooler
11