Access Control; Wds - TP-Link AC750 User Manual

CR2 AC750 Wireless Dual-Band Router

4.3.4 Access Control

The Wireless MAC Address Filtering feature allows you to control wireless stations
accessing the router, which depend on the station's MAC addresses.
Wireless Access Control Mode: If you choose 'Allowed Listed', only those clients
whose wireless MAC addresses are in the access control list will be able to connect to
your Access Point. When 'Deny Listed' is selected, these wireless clients on the list will
not be able to connect the Access Point. The MAC Address format is 001122334455.

4.3.5 WDS

Wireless Distribution System uses wireless media to communicate with other APs, like
the Ethernet does. To do this, firstly you must set AP Mode to WDS or AP+WDS in basic
setting, then enable WDS function and set another AP MAC which you wan to
communicate with. The WDS supports WEP and PSK security mode. Of course in order
to make APs work, you have to keep them the same channel and security mode.
24