Advanced; Security - TP-Link AC750 User Manual

CR2 AC750 Wireless Dual-Band Router

4.3.2 Advanced

These settings are only for more technically advanced users who have a sufficient
knowledge about wireless LAN. These settings should not be changed unless you know
what effect the changes will have on your Access Point.
Fragment Threshold: This value is the maximum size determining whether packets will
be fragmented. Setting the Fragmentation Threshold too low may result in poor network
performance since excessive packets.
RTS Threshold: RTS stands for "Request to Send". This parameter controls what size
data packet the frequency protocol issues to RTS packet. The default value of the
attribute is 2347. It is recommended not to modify this value in SOHO environment.
Beacon Interval: Enter a value between 20-1024 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons.
IAPP: Inter-Access Point Protocol.
Short GI: This function is recommended for it will increase the data capacity by reducing
the guard interval time.
STBC: Space Time Block Coding improves reception by coding the data stream in
blocks.
RF Output Power: Here you can specify the rf output power of router.

4.3.3 Security

This page allows you setup the wireless security. Turn on WEP or WPA by using
Encryption Keys could prevent any unauthorized access to your wireless network.
23