Related Manuals for Edgewater Networks EdgeMarc 4570
Summary of Contents for Edgewater Networks EdgeMarc 4570
- Page 1 EdgeMarc 4570 Enterprise Session Border Controller Quick Start Guide Version 1.0 Edgewater Networks / 2895 Northwestern Parkway, Santa Clara, CA 95051 Phone: +1 (408) 351-7200 / Email: support@edgewaternetworks.com...
- Page 2 Before You Start Please read this guide thoroughly as it describes the basic installation of the device. Additional configuration needed to deploy the device in a specific environment can be performed with the help of online help. This guide also provides an example of a typical 4570 deployment that can be used as a guideline for your installation.
- Page 3 Instructions Step 1 Connecting the Cables 1. Connect one end of an Ethernet cable to local LAN port 1 of the 4570. This port can be seen in the "B" of the above diagram. Connect the other end of the cable to your computer’s Ethernet port.
- Page 4 Step 2 Configuring the EdgeMarc 1. Launch a web browser on the PC and enter the following URL: http://192.168.1.1 and hit enter 2. The following login window should appear: 3. Enter “root” in the “User name” field and “default” in the “Password” field. 4.
- Page 5 Step 3 Plan Your Configuration The EdgeMarc 4570 can be deployed as a Session Border Controller in a network. It can also be deployed in a network behind an existing firewall. For more information about deploying your EdgeMarc behind a firewall, visit our support knowledgebase at http://www.edgewaternetworks.com/kb...
Need help?
Do you have a question about the EdgeMarc 4570 and is the answer not in the manual?
Questions and answers