Cleaning Mode Selection; Programming The Robot; Additional Settings - ECOVACS DEEBOT OZMO 930 Owner's Manual

* For models with app-connectivity, various functions can be performed using the ECOVACS
App.

3.3 Cleaning Mode Selection

Modes are selected using the ECOVACS App.
1 AUTO Cleaning Mode
This is the most commonly used mode. In
AUTO Cleaning Mode, DEEBOT cleans in a
back and forth straight-line pattern.
2 Spot Cleaning Mode
This mode is applicable for areas of highly concentrated dirt or dust. In Spot Cleaning Mode,
cleaned with Spot Cleaning Mode using ECOVACS App.
3 Area Cleaning Mode
selected to be cleaned with Area Cleaning Mode using ECOVACS App.

3.4 Programming the Robot

Time Scheduling
ECOVACS App.

3.5 Additional Settings

Virtual Boundary
using ECOVACS App.
Continued Cleaning Function
When Continued Cleaning function is turned on, once DEEBOT is fully recharged, it automatically
returns to and continues to clean the uncleaned area not completed during the last cleaning task.
3. Operating and Programming
15
EN