Document Revision History - Carrier Connect Installation Manual

Document revision history

Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date Topic
11/3/17 To connect a remote input (sensor or
contacts)
10/3/17 Recovering from a power outage
8/1/17 To configure advanced SYSTEM
SETTINGS
What is the Carrier Connect™ Wi-Fi
6/5/17
Thermostat?
5/9/17 Fault definitions
To configure advanced SYSTEM
SETTINGS
To connect a remote input (sensor or
contacts)
To wire and mount the thermostat
* For internal use only
Carrier Connect™
Wi-Fi Thermostat
Installation Guide
Change description
Added diagrams for connecting 4 sensors and for 9 sensors.
New information.
Removed note regarding FAULT INPUT not being available.
Added contents of package
Added ECONOMIZER FAULT
Added OCCUPANCY and FAULT INPUT to REMOTE SENSOR.
Added OCCUPANCY OUTPUT, OCCUPANCY INPUT, and LINE
FREQUENCY.
Title changed from To connect a remote sensor.
Power specs now N/A.
Occ contact N.O. and Fault Input N.O. added to sensor graphic.
Prerequisite for the shield and ground wires removed from
document.
Carrier Proprietary and Confidential
41
Document revision history
Code*
C-TS-CP-F/E
C-TS-CP-F/E
C-TS-CP-E-ZL
C-TS-CP-E-RD
C-TS-CP-E-RD
C-TS-CP-E-RD
C-TS-CP-E-RD
C-TS-CP-E-RD
CARRIER CORPORATION ©2017
All rights reserved