Configuring the system
Configuring the system
1
On the thermostat, not a mobile device, swipe the HOME screen twice to the left to navigate to the MODE
screen and ensure the MODE is OFF.
NOTE The yellow line above a button indicates it is the current MODE.
2
Go to the FAN screen and then press and hold the Fan Button
SETTINGS screen.
NOTE You can ONLY access the SYSTEM SETTINGS screens from the thermostat itself, not the app or web.
3
Enter the 3-digit security PIN code, if applicable, to open the SYSTEM SETTINGS screen.
4
Use the advanced options on the SYSTEM SETTINGS screens to configure and setup your system, change,
and view options.
NOTES
The yellow Row Indicator at the right side of the screen indicates the current location in the list of
○
advanced settings options. Swipe up or down to navigate through options and then tap to select one.
Swipe on any of the SYSTEM SETTINGS sub-screens to return to the SYSTEM SETTINGS main screen.
○
Carrier Connect™
Wi-Fi Thermostat
Installation Guide
Carrier Proprietary and Confidential
16
for 5 seconds to get to the SYSTEM
CARRIER CORPORATION ©2017
All rights reserved