Using the Carrier® Connect™ Wi-Fi Thermostat's screens
•
Equipment Status — This button is static except when equipment is being activated and then it pulses on and
off.
If you tap the Fan mode/operation
○
If you tap the Heat
○
SETPOINT
Use this screen to view, adjust, or hold heat and cool setpoints. Use the wheels to adjust setpoints. Drag a wheel
up or down or tap the top or bottom of the wheel to increase or decrease by 1 increment.
There are 2 different buttons that can appear in the center of this screen. Press to switch buttons and functions.
•
OCCUPIED/UNOCCUPIED button
•
PLAY button allows you to either play (use as is) or alter the program schedule
•
Text on top of the button is the current state
•
Text beneath the button is what will happen when you press the button
If the schedule is running, the Occupancy button and the text display whether the schedule is currently running
OCCUPIED or UNOCCUPIED setpoints. Press the button to switch heat and/or cool setpoints between Occupied
and Unoccupied settings and then the Occupancy button changes to the PLAY button.
When the schedule is not running, the text above the Play button says OCCUPIED if the heat and cool setpoints
are the same as the OCCUPIED setpoints or UNOCCUPIED if the heat and cool setpoints match the Unoccupied
setpoints. If neither is true, HOLD displays. When the schedule is paused, the remaining hold time shows in the
lower right corner.
Carrier Connect™
Wi-Fi Thermostat
Installation Guide
icons, the screen switches to the FAN screen.
or Cool
icons, the screen switches to the MODE screen.
Carrier Proprietary and Confidential
28
CARRIER CORPORATION ©2017
All rights reserved