Auto-Learning; About Enabling Auto-Learning; Enabling Auto-Learning - Cisco Nexus 6000 Series Configuration Manual

Auto-Learning

Auto-Learning

About Enabling Auto-Learning

The state of the auto-learning configuration depends on the state of the port security feature:
• If the port security feature is not activated, auto-learning is disabled by default.
• If the port security feature is activated, auto-learning is enabled by default (unless you explicitly disabled
If auto-learning is enabled on a VSAN, you can only activate the database for that VSAN by using the
Tip
force option.

Enabling Auto-Learning

You can enable auto-learning.
The state of the auto-learning configuration depends on the state of the port security feature:
• If the port security feature is not activated, auto-learning is disabled by default.
• If the port security feature is activated, auto-learning is enabled by default (unless you explicitly disabled
Tip If auto-learning is enabled on a VSAN, you can only activate the database for that VSAN by using the
force option.
Procedure
Step 1
Step 2
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
156
this option).
this option).
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
port-security auto-learn vsan vsan-id
Example:
switch(config)# port-security
auto-learn vsan 1
Configuring Port Security
Purpose
Enters global configuration mode.
Enables auto-learning so the switch can learn
about any device that is allowed to access VSAN
1. These devices are logged in the port security
active database.
OL-27932-01