vPC Topologies
vPC Topologies
When VNP ports are configured vPC topologies between an FCoE NPV bridge and an FCF, the following
limitations apply:
• vPC spanning multiple FCFs in the same SAN fabric is not supported.
• For LAN traffic, dedicated links must be used for FCoE VLANs between the FCoE NPV bridge and
• FCoE VLANs must not be configured on the inter-switch vPC interfaces.
• VF port binding to a vPC member port is not supported for an inter-switch vPC.
Figure 5: VNP Ports in an Inter-Switch vPC Topology
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
42
the FCF connected over a vPC.
Configuring FCoE NPV
OL-27932-01