Ipv6 Multicast Vlan Configuration Task List; Configuring A Sub-Vlan-Based Ipv6 Multicast Vlan; Configuration Prerequisites; Configuration Guidelines - HPE FlexNetwork 5130 EI Series Configuration Manual

Ip multicast
Hide thumbs Also See for FlexNetwork 5130 EI Series:
Table of Contents

Advertisement

IPv6 multicast VLAN configuration task list

Task at a glance
(Required.) Perform one of the following tasks:

Configuring a sub-VLAN-based IPv6 multicast VLAN

Configuring a port-based IPv6 multicast VLAN
Configuring user port attributes
Assigning user ports to an IPv6 multicast VLAN
(Optional.)
Setting the maximum number of IPv6 multicast VLAN forwarding entries
If you have configured both a sub-VLAN-based IPv6 multicast VLAN and a port-based IPv6 multicast
VLAN on a device, the port-based IPv6 multicast VLAN configuration takes effect.
Configuring a sub-VLAN-based IPv6 multicast
VLAN
You must first configure a VLAN as an IPv6 multicast VLAN, and then assign the VLANs that contain
multicast receivers to the IPv6 multicast VLAN as sub-VLANs.

Configuration prerequisites

Before you configure a sub-VLAN-based IPv6 multicast VLAN, complete the following tasks:
Create VLANs as required.
Enable MLD snooping for the VLAN to be configured as the IPv6 multicast VLAN, and for the
VLANs to be configured as sub-VLANs.

Configuration guidelines

When you configure a sub-VLAN-based IPv6 multicast VLAN, follow these guidelines:
The VLAN to be configured as the IPv6 multicast VLAN must exist.
A VLAN to be configured as a sub-VLAN must exist and cannot be an IPv6 multicast VLAN or a
sub-VLAN of any other IPv6 multicast VLANs.
The total number of IPv6 multicast VLANs on a device cannot exceed the upper limit.

Configuration procedure

To configure a sub-VLAN-based IPv6 multicast VLAN:
Step
1.
Enter system view.
2.
Configure a VLAN as an
IPv6 multicast VLAN and
enter its view.
3.
Assign the specified VLANs
to the IPv6 multicast VLAN
as sub-VLANs.
Command
system-view
ipv6 multicast-vlan
vlan-id
subvlan vlan-list
87
Remarks
N/A
By default, a VLAN is not an IPv6
multicast VLAN.
By default, an IPv6 multicast VLAN does
not have any sub-VLANs.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents