Setting The Maximum Number Of Multicast Vlan Forwarding Entries; Displaying And Maintaining Multicast Vlans - HPE FlexNetwork 5130 EI Series Configuration Manual

Assigning ports to a multicast VLAN in multicast VLAN view
Step
1. Enter system view.
2. Configure a VLAN as a
multicast VLAN and enter
multicast VLAN view.
3. Assign ports to the
multicast VLAN.
Assigning a port to a multicast VLAN in interface view
Step
1. Enter system view.
2. Configure a VLAN as a
multicast VLAN and
enter its view.
3. Return to system view.
4. Enter interface view.
5. Assign the current port
to the multicast VLAN.
Setting the maximum number of multicast VLAN
forwarding entries
You can set the maximum number of multicast VLAN forwarding entries on the switch. When the
upper limit is reached, the switch does not create multicast VLAN forwarding entries until some
entries age out or are manually removed.
If the total number of the entries exceeds the upper limit value that you are setting, the system does
not automatically remove existing entries or create new entries. As a best practice, manually remove
some entries to allow new entries to be created.
To set the maximum number of multicast VLAN forwarding entries:
Step
1. Enter system view.
2. Set the maximum number of
multicast VLAN forwarding
entries.

Displaying and maintaining multicast VLANs

Execute display commands in any view and reset commands in user view.
Task
Display information about multicast
VLANs.
Command
system-view
multicast-vlan vlan-id
port interface-list
Command
system-view
multicast-vlan vlan-id
quit
interface interface-type
interface-number
port multicast-vlan vlan-id
Command
system-view
multicast-vlan entry-limit limit
Command
display multicast-vlan [ vlan-id ]
47
Remarks
N/A
By default, a VLAN is not a multicast VLAN.
By default, a multicast VLAN does not have
any user ports.
Remarks
N/A
By default, a VLAN is not a multicast
VLAN.
N/A
N/A
By default, a user port does not belong
to any multicast VLAN.
Remarks
N/A
The default setting is 256.