Filling The Salt Reservoir - Miele G 7804 Operating Instructions Manual

Filling the salt reservoir

Only use special coarse grained
reactivation salt with granules of
approx. 1 - 4 mm. Do not use other
types of salt such as cooking salt,
agricultural grade or gritting salt. These
may contain insoluble additives which
can impair the functioning of the water
softener. If in doubt consult the Miele
Professional Department.
The salt reservoir holds approx.
2.5 kg of salt.
,
Inadvertently filling the salt
reservoir with cleaning agent will
damage the water softener.
Before filling the salt reservoir make
sure that you have picked up the
right packet of reactivation salt.
^ Remove the bottom basket from the
machine.
^ Unscrew the salt reservoir cap.
Before filling the salt reservoir with
reactivation salt for the first time, you
must fill it with approx. 2.5 litres of
water to enable the salt to dissolve.
Once the machine has been used,
there is always sufficient water in the
reservoir.
^ Place the funnel provided in position.
^ Fill carefully with salt.
As it is poured in, displaced water will
run out.
Water softener
17