Installation; Wall Mounting; Connection Of Cables - Westermo Viper 12A Series User Manual

4. Installation

4.1. Wall Mounting

The unit can be wall mounted vertically or horizontally. There are four pieces of 7 mm
bores for this. Use four M5, M6 or 1/4" screws with 12 mm washers on a flat and stable
surface.
X1
ON
USB
X2
RSTP
FRNT
X3
CON
DC
X4
24-110 V
DC
Figure 3. Wall mounting

4.2. Connection of Cables

Recommended tightening torque for the M12 connectors is 0.6 Nm.
When connecting the power cable, ensure that the pins are connected correctly before
tightening the power cable to the unit.
NOTICE - UNUSED CONNECTORS
Unused connectors must be covered by a protective cap (delivered with
the unit), tightened to the specified torque in order to fulfill the specified
ingress protection code.
X5 X9
X6 X10
X7 X11
X8 X12
1000BASE- T
Viper 12A Series 15