Networking Screen - ZyXEL Communications WAP6804 User Manual

Figure 30 LAN and WAN IP Addresses

10.4 Networking Screen

Use this screen to change your basic LAN settings. Click Network > Networking.
Figure 31 Network > Networking
The following table describes the labels in this screen.
Table 18 Network > Networking
LABEL
LAN IP
IP Address
Chapter 10 Network
DESCRIPTION
Select DHCP to deploy the WAP6804 as a DHCP client in the network. When you enable this,
the WAP6804 gets its IP address from the network's DHCP server (for example, your ISP or
router). Users connected to the WAP6804 can now access the network (i.e., the Internet if
the IP address is given by the ISP or a router with Internet access). When you select this, you
cannot enter an IP address for your WAP6804 in the field below.
Select Static IP if you want to specify the IP address of your WAP6804. Or if your ISP or
network administrator gave you a static IP address to access the network or the Internet.
Type the IPv4 address of your WAP6804 in dotted decimal notation if you select Static IP.
WAP6804 User's Guide
58