Front Panel And Leds - ZyXEL Communications WAP6804 User Manual

• Back up the configuration (and make sure you know how to restore it). Restoring an earlier working
configuration may be useful if the device becomes unstable or even crashes. If you forget your
password, you will have to reset the WAP6804 to its factory default settings. If you backed up an
earlier configuration file, you would not have to totally re-configure the WAP6804. You could simply
restore your last configuration.

1.3 Front Panel and LEDs

The following figure is the front panel of the WAP6804. Use the LEDs to determine if the WAP6804 is
behaving normally or if there are some problems on your network.
Figure 1 Front Panel
Chapter 1 Introduction
WAP6804 User's Guide
11