Table 6 Navigation Panel: Access Point Mode
LINK
TAB
MAINTENANCE
Password
Password
Setup
Time
Time Setup
Firmware
Firmware
Upgrade
Upgrade
Telnet
Telnet
Restore
Restore
Restart
Restart
Chapter 5 Access Point Mode
FUNCTION
Use this screen to change the password of your WAP6804.
Use this screen to change your WAP6804's time and date.
Use this screen to upload firmware to your WAP6804.
Use this screen to enable or disable Telnet. Telnet allows you to access the
WAP6804's command line interface.
Use this screen to backup and restore the configuration or reset your WAP6804
to the factory defaults.
Use this screen to reboot the WAP6804 without turning the power off.
WAP6804 User's Guide
32