Pin Configuration - ZyXEL Communications WAP6804 User Manual

Figure 21 Example WPS Process: PBC Method
Wireless Client

8.3.2 PIN Configuration

When you use the PIN configuration method, you need to check the client's PIN number and use the
configuration interface of the WAP6804 in AP mode.
Go to your phone settings and turn on WiFi. Open the WiFi networks list and tap WPS PIN Entry to get a
1
PIN number.
Enter the client's PIN number to the PIN field in the Networking > Wireless Network 2.4G or Wireless
2
Network 5G > WPS screen on the WAP6804 (in AP mode).
Click the WPS PIN button (or button next to the PIN field) on the WAP6804's WPS screen within two
3
minutes.
The WAP6804 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
WAP6804 securely.
The following figure shows an example of how to set up wireless network and security on WAP6804 and
wireless client (the Android smartphone in this example) by using PIN method.
Chapter 8 Tutorials
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
WAP6804 User's Guide
45
AP