Store A Police/Fire Frequency To A Rx Channel - Uniden UH9050 Owner's Manual

Operation - Special Features
Store a Police or Fire frequency to a RX Channel
Select the Police or Fire (& Ambulance) channels group by press and hold [POLICE],
and then select a desired frequency by pressing
Or during SCAN, when scan stops on a Police or Fire (& Ambulance) frequency which
you wish to store press [HOLD] to stay on that frequency.
1. Press and hold [MENU]. The selected Police and Fire (& Ambulance) frequency
programmed to the lowest available empty RX channel. The RX channel will appear
and alternating with the selected Police and Fire (& Ambulance) frequency.
Press [PTT] on the microphone to exit programming mode and if you do not wish to
edit any other setting.
2. Turn the Rotary PWR/VOL if you wish to select another RX channel.
3. Press the Rotary PWR/VOL. A long confirmation tone sounds to indicate
programming the selected channel.
The RX channel number flashes.
4. Press and hold [MENU] to save the setting and exit programming mode.
UNIDEN UH9050
/ channel selector.
41
UHF CB Transceiver