Uniden UH9050 Owner's Manual page 32

Operation
To select MASTER SCAN Mode:
1. Press [MENU].
2. Press the [MENU] or Rotary PWR/VOL to
confirm selection.
3. Press / channel selector or turn the
Rotary PWR/VOL at the base till Scan
display on the screen. Press the [MENU] or
Rotary PWR/VOL to confirm selection.
4. Press / channel selector or turn the
Rotary PWR/VOL to select desired preset
GS memory group. Press the [MENU] or Rotary
PWR/VOL to confirm selection.
MASTER: Master Scan is ON with the current GS channel memory. Open/
PREST1: Master Scan is ON with loading CH09-20 in GS.
PREST2: Master Scan is ON with loading CH21-30, 39, 40 in GS.
PREST3: Master Scan is ON with loading CH49-60 in GS.
PREST4: Master Scan is ON with loading CH61-70, 79, 80 in GS.
5. Press / channel selector or turn the Rotary PWR/VOL at the base to select
desired CTCSS code 01 - 38 or DCS code 01 - 104.
CTCSS:
6. Press the Rotary PWR/VOL or [MENU] to save the setting.
7. Press Rotary PWR/VOL or press and hold [MENU] to exit menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH9050
Group Scan is disabled.
DCS:
32
UHF CB Transceiver