Uniden UH9050 Owner's Manual page 17

Mounting the MIC Hanger
MIC Hanger mounted over MIC Cable
The curly cord of the Remote LCD Speaker MIC can extend up to 2m.
For practical installation of the MIC Hanger mounted over MIC Cable use
this method with the Extension Cable.
NOTE
Microphone
Microphone
MIC
CH
The plug of the extension cable connects to the Radio. The socket end of the extension
cable connects with the microphone plug.
1. The rubber collar (dust cover) on the microphone cable is not required and can be
cut away or pushed out of the way along the cable.
2. Drill a 13mm hole at the MIC hanger location.
3. Thread the microphone plug through the hole and connect with the extension cable.
4. Mount the MIC Hanger over the hole and cable.
5. At the Radio: Connect the extension cable plug to the MIC Jack. Fit the rubber
bushing over the MIC jack.
UNIDEN UH9050
2
4
5
Radio
1
Extension Cable
17
3
UHF CB Transceiver