Buffer Full Overwrite Policy; One-Touch Dial; Talkgroup Dialing By Index; Viewing The Talkgroup Speed Number - Motorola MTP8000Ex Series Feature User Manual

• Press and hold the One Touch Button configured to display the Send RMS/FMS menu.
• Use a menu shortcut assigned to the Send RMS/FMS menu.
NOTICE: The navigation through the radio menu is only available if your service provider
enabled the Send RMS/FMS menu item. However, your service provider can configure a
One Touch Button to display the Send RMS/FMS menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the Send RMS/FMS menu item is disabled, and no
One Touch Button is configured to display the Send RMS/FMS menu, then the radio can
only receive RMS messages but cannot send them.
6.3

Buffer Full Overwrite Policy

Upon receiving a text message, the radio places the text into a circular buffer. You are notified when a
new text message is received and a quick access to read the message is provided. If a delivery report
is requested, the radio sends it upon receipt of the message by SDSTL. If a consumed report is
requested, the radio sends it when you read the message.
NOTICE: If you read the message when the radio is out of service, the report may not be sent.
You can save incoming or edited (outgoing) text messages. These messages can be edited and sent.
For each message, you can verify its timestamp. The timestamp displayed is extracted from the SDS
TL PDU. The timestamp is generated and inserted to the message by the SwMI.
6.4

One-Touch Dial

This feature allows you to call by pressing and holding one of the keys (1-9).
NOTICE: If the One-Touch Button feature is disabled, One-Touch Dial is disabled as a
consequence. If no feature is assigned to a button that you press, your radio displays an
Unassigned Button message.
In RMS mode, the One-Touch Button feature is disabled.
6.5

Talkgroup Dialing by Index

This feature allows you to attach to any talkgroup by dialing its index, instead of choosing it from the
talkgroup folders and lists.
NOTICE: It is also known as Talkgroup Speed Dial.
6.5.1

Viewing the Talkgroup Speed Number

Procedure:
1 From the home screen, press Optns.
2 Select one of the following:
• TG by Folder then select the folder and highlight the required talkgroup.
• TG by abc enter up to 15 characters to narrow the talkgroup names and highlight the
required talkgroup.
Send Feedback
MN002041A01–AA
Chapter 6: Features
145