MN002041A01–AA
Chapter 5: Main Menu
NOTICE:
Activation code must be sent to the device by third party application.
Radio-initiated automatic reconnection with remote Bluetooth devices cannot be
guaranteed to be successful in 100% of cases when several devices need to reconnect
at the same time, due to the fundamental nature of Bluetooth. In case the reconnection
fails after a power cycle (power off and power on of the radio), reconnect the device
manually.
The radio is now able to notify the dispatcher when the status of the firearm device changes. If
configured, the location (using GPS) of the radio is reported as well. Once a firearm sensor
device is connected, it can be managed from the Devices menu.
4 To disconnect a firearm sensor device, go to the Devices menu and follow the normal device
management procedure.
5.7
Browser
This menu item activates a WAP browser that allows you to browse the Internet from your radio.
5.8
Security
This sub-menu stores all your security settings.
5.8.1
PIN Protect
This feature allows you to enable PIN code authentication at the next power on. This code protects
your radio against unauthorized use.
If you are unable to unlock the radio, you can only send or receive Emergency Calls and adjust the
volume level with the R
OTARY
5.8.1.1
Protecting the Radio with a PIN Code
Procedure:
1 From the home screen, press M
2 Select On.
3 Enter 4-digit PIN code. By default it is 0000 (four zeros).
NOTICE: To increase security, set your own PIN code.
Postrequisites: Each time you turn on the terminal, PIN code is required.
5.8.1.2
Unblocking Your Radio
Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
106
K
.
NOB
→ Security → PIN Protect.
ENU
Send Feedback