Motorola MTP8000Ex Series Feature User Manual page 168

MN002041A01–AA
Appendix C: Troubleshooting
Message
File Invalid
File Storage Not Available or
No Picture Storage
Gateway available
Gateway not available
This group already exists
Individual Calls Only
Insufficient visible data
Insufficient visible satellites
Invalid ID
Invalid Shortcut Position
Limited Service
List Empty
List Not Attached
List Partially Attached
Message Delivered
Message Failed
New Delivery Status
No Service
Not allowed in repeater mode
My Groups
Is Empty
My Groups
Is Full
Network Trouble
No Answer
168
Message Description
The picture you are trying to open is damaged.
Memory for file storage is inaccessible. Possible reasons:
the microSD card is formatted incorrectly or is not installed
at all, the internal radio memory is damaged, there is not
enough available space to save a file, the radio is connect-
ed to a computer in the USB Mass Storage mode, or you
try take a picture or start the Picture Browser when the
USB mode is set to PEI.
Your radio has connected to a gateway.
Your radio cannot connect to a gateway, or connection has
been lost.
The group you are attempting to add exists in the My
Groups folder.
You can make only individual (private) calls.
Your radio is in the process of determining your location.
This process may take several minutes to complete.
Your radio is in the process of determining your location.
This process may take several minutes to complete.
The entered number is not valid.
The entered number is not valid.
Emergency Calls, Emergency Alarms, and mobility opera-
tions (for example group attachment) are allowed. All other
incoming and outgoing call and data services are blocked.
There are no programmed entries in the scrolling list. Type
the entry.
All talkgroups in the scan list are not attached.
The scan list is active, but not all talkgroups are attached
to it.
Indicates mail successfully delivered.
Indicates mail delivery failure.
You have received a new Delivery Status.
Your radio is outside coverage. Return to coverage.
The service or feature is not available in the Repeater
Mode..
You cannot view/delete groups when the My Groups fold-
er is empty.
You are not allowed to add a group to the My Groups fold-
er as it already contains the maximum allowed number of
groups.
Network problems. Please try again later.
The called party does not answer.
Table continued...
Send Feedback