Motorola MTP8000Ex Series Feature User Manual page 44

MN002041A01–AA
Chapter 2: Getting Started
Icon Description
Non Secured Call – Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call – Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the
radio:
• Is in TMO Mode.
• Communicates through a gateway.
Not Secured Call – Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The
icon appears after the PTT button is pressed.
Non-formatted SD Card
• Solid – The microSD card is:
-
-
-
• Blinking – The microSD card is being formatted.
USB Connected – Indicates that the radio is connected to the computer via the
USB cable. Visible only in the Mass Storage mode.
Bluetooth Connected. Bluetooth is enabled and at least one device is connect-
ed.
Bluetooth Disconnected
Solid indicates that Bluetooth is enabled, but no device is connected.
Blinking indicates one of the following:
• Bluetooth is enabled and the radio is in the Discoverable Mode.
• Bluetooth is enabled and a connection with a remote device is being estab-
lished.
An outgoing OPP transfer (upload).
An incoming OPP transfer (download).
Remote Control
Indicates that the radio is being remotely controlled and some commands
are being executed in the background. For example, when the radio is con-
trolled via special SDS messages or triggered to send a GNSS location re-
port.
The icon is not visible in the Extra Zoom Mode.
44
Not formatted at all,
Formatted incorrectly, or
Damaged.
Send Feedback