MN002041A01–AA
Chapter 4: Global Navigation Satellite System (GNSS) Location Service
4.6
Changing GNSS Accuracy
Procedure:
1 From the home screen, press the
2 Select Location → Accuracy.
3 Select one of the following:
•
Medium (default) – Power consumption optimization is combined with less position accuracy.
•
High – Better position accuracy is combined with less power consumption optimization.
NOTICE: If connected to an external charging device, the radio automatically enters the
High mode.
4.7
Viewing Testpage
Procedure:
1 From the home screen, press the
2 Select Location → Testpage.
3 Select one of the following:
•
Position – displays detailed information on radio's current position: time, N (latitude), E
(longitude), H (height), Sats Used (a number of tracked satellites), B (bearing), HS
(horizontal speed), LC (level of confidence).
•
Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
•
Version – displays detailed information on software version: SW (software version), HW
(hardware version), ASIC (application-specific integrated circuit), RC (release code).
80
key.
MENU
key.
MENU
Send Feedback