AQUALUX AQLXC-5RO Operating Manual page 11

QUICK CONNECT FITTINGS - To complete the tubing connections using quick connect fittings:
1. Confirm the tubing ends are cut squarely not at an angle and without burrs.
2. Firmly insert the end of the tubing into the quick connect fitting until the tubing bottoms. The tubing
will insert into the fitting approximately 5/8".
3. To remove the tubing from the quick connect fitting, press firmly and evenly on the protruding collet
with your fingers or 3/8" wrench. The gripping mechanism will release and the tubing may be
withdrawn.
NOTE: If the quick connect fitting slightly weeps water after connecting, Remove the tubing squarely and
insert again.
TUBING CONNECTIONS below designate tubing color and the label on the reverse osmosis head assembly
associated with the fitting connection point.
A. Connect the BLACK tubing to the DRAIN
B. Connect BLUE tubing to long reach FAUCET stud.
C. Connect WHITE tubing to shut off valve fitting on the storage TANK.
D. Connect ORANGE tubing to the cold FEED water supply connector.