Carton Contents; Unpacking And Checking Contents; Table Saw - Porter-Cable PCB270TS Instruction Manual

UNPACKING AND CHECKING CONTENTS

Carefully unpack the table saw and all its parts, and
compare against the list below and the illustration on
the next page. With the help of an assistant place the
saw on a secure surface and examine it carefully.
WARNING
!
To avoid injury from unexpected starting or electrical
•
shock, do not plug the power cord into a source of
power during unpacking and assembly. The cord
must remain unplugged whenever you are adjusting/
assembling the saw.
The saw is heavy and should be lifted with care.
•
Get the assistance of someone to lift and move the
saw.
If any part is missing or damaged, do not attempt
•
to assemble the table saw, or plug in the power
cord until the missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
STAND
ITEM DESCRIPTION
A. Leg set
Front right leg - no. 2
Rear right leg - no. 3
Front left leg - no. 5
Rear left leg - no. 6
B. Right leg support - no. 1
Left leg support - no. 4
C. Leg assembly hardware bag
Square neck bolts
Hex nuts
D. Front leg support - no. 7
E. Rear top leg support - no. 8
Rear bottom leg support - no. 9
F. Foot pads
G. Caster assembly bracket
H. Front casters / rear casters
I. Caster assembly hardware bag
Socket hex bolt - long
Socket hex bolt
Socket hex bolt - short
Hex nuts
6 mm hex key

CARTON CONTENTS

QUANTITY
1 set
1
1
1
1
1
1
1 set
22
22
1
1
1
1 set
1
2 each
1 set
1
2
2
3
1
– 9 –
ITEM DESCRIPTION
J. Storage parts
Miter guage storage
Rip fence storage
Power cord storage
Blade guard assembly storage
K. Storage parts hardware
Screws - long
Screws - short
Nuts
Screws with washers
TABLE OF LOOSE PARTS

TABLE SAW

ITEM DESCRIPTION
L. Table saw assembly
M. Right / left table extension
N. Front table extension rail
O. Rear table extension rail
P. Hex bolts
Q. Table extension hardware bag
R. Front rail covers
S. Front rail hardware bag
Hex bolts - long
Hex bolts - short
Square nuts
T. Rear rail hardware bag
Hex bolts
Hex nuts
U. Handwheel, dome nut, handle, nut
V. Riving knife
W. Anti-kickback pawl
X. Blade guard
Y. Miter gauge
Z. Rip fence
AA. Blade wrench
BB. Push stick
QUANTITY
1
1 set
1 set
1 set
1 set
2
2
4
6
QUANTITY
1
1 each
1 set
1 set
4
1 set
1 set
1 set
4
2
6
1 set
6
2
1 each
1 set
1
1
1
1 each
1
1