Recording Movies With Subjects At The Same Size Shown Before Shooting; Customizing Camera Operation; Preventing The Af-Assist Beam From Firing - Canon PowerShot G1 X Mark III Camera User Manual

Recording Movies with Subjects at the Same
Size Shown before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for image straightening and correction
of significant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel Auto level.
Set [ Auto level] to [Disable] as
z
described in "Deactivating Auto Level"
( = 53).
Follow step 1 in "Deactivating Image
z
Stabilization" ( = 53) to access the [IS
Settings] screen.
Choose [Dynamic IS], and then choose
z
[Low] ( = 31).
● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
● [Dynamic IS] is not available when [IS Mode] is set to [Off]
( = 53).
● Only [Standard] is available when the movie quality is [
(NTSC) or [ ] (PAL).

Customizing Camera Operation

Customize shooting functions on the [
Still Images Movies
follows.
For instructions on menu functions, see "Menu Screen" ( = 31).

Preventing the AF-Assist Beam from Firing

The lamp lights up to help you focus when you press the shutter button
halfway in low-light conditions. This lamp can be deactivated.
]
] tab of the menu screen as
Still Images Movies
Press the [ ] button, choose
z
[AF-assist beam firing] on the [ 3] tab,
and then choose [Disable].
To restore the original setting, repeat this
z
process but choose [Enable].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
54