Playback - Canon PowerShot G1 X Mark III Camera User Manual

4
Shoot.
Shooting Still Images
1) Focus.
Press the shutter button lightly, halfway
z
down. The camera beeps twice after
focusing, and frames are displayed to
indicate image areas in focus.
If [Raise the flash] is displayed, lift the
z
flash with your fingers. It will fire when
shooting. If you prefer not to use the
flash, push it down with your finger, into
the camera.
2) Shoot.
Press the shutter button all the way
z
down.
As the camera shoots, a shutter sound
z
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Keep the camera still until the shutter
z
sound ends.
After displaying your shot, the camera will
z
revert to the shooting screen.
Recording Movies
1) Start recording.
Press the movie button. The camera
z
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
( 1 )
time (1).
Black bars are displayed on the top and
z
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Frames displayed around any detected
z
faces indicate that they are in focus.
Once recording begins, take your finger
z
off the movie button.
2) Stop recording.
Press the movie button again to stop
z
recording. The camera beeps twice as
recording stops.

Playback

After shooting images or movies, you can view them on the screen as
follows.
1
Enter Playback mode.
Press the [
z
Your last shot is displayed.
z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
] button.
Index
24