Changing The Is Mode Settings; Deactivating Image Stabilization; Recording Movies With Subjects At The Same Size Shown Before Shooting - Canon Ixus 285 HS User Manual

Changing the IS Mode Settings

Deactivating Image Stabilization

When the camera is held still (as when shooting from a tripod), you should
set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
● Press the [
Settings] on the [
the [ ] button ( = 25).
2
Configure the setting.
● Press the [ ][ ] buttons to choose [IS
Mode], and then choose [Off] by pressing
the [ ][ ] buttons.
Optimal image stabilization for the shooting conditions is
Continuous
automatically applied (Intelligent IS) ( = 33).
Off Deactivates image stabilization.
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
Still Images Movies
shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization.
] button, choose [IS
] tab, and then press
Recording Movies with Subjects at the Same Size
Shown before Shooting
● Follow the steps in "Deactivating Image
Stabilization" ( = 41) to access the [IS
Settings] screen.
● Choose [Dynamic IS], and then choose
[2] ( = 25).
● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
● [Dynamic IS] is not available when [IS Mode] is set to [Off]
( = 41).
● When the movie quality is [ ], Dynamic IS is [1] and cannot be
changed.
Before Use
Basic Guide
Still Images Movies
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
41