Preventing The Red-Eye Reduction Lamp From Lighting Up; Changing The Image Display Style After Shots - Canon PowerShot G1 X Mark III Camera User Manual

Preventing the Red-Eye Reduction Lamp from
Lighting Up
A red-eye reduction lamp lights up to reduce red-eye when the flash is
used in low-light shots. This lamp can be deactivated.
1
Access the [Flash Control] screen.
Press the [
z
Control] on the [
the [ ] button.
2
Configure the setting.
Choose [Red-Eye Lamp], and then
z
choose [Off].
To restore the original setting, repeat this
z
process but choose [On].

Changing the Image Display Style after Shots

Still Images Movies
You can change how long images are displayed after shots.
] button, choose [Flash
5] tab, and then press
2 sec.,
4 sec.,
8 sec.
Hold
Off
Still Images
Press the [ ] button, choose
z
[Image review] on the [
choose the desired option.
To restore the original setting, repeat this
z
process but choose [2 sec.].
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Displays images until you press the shutter button
halfway.
No image display after shots.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information.
Before Use
Movies
Basic Guide
Advanced Guide
2] tab, and then
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
55