Canon PowerShot G1 X Mark III Camera User Manual page 152

9
Install a driver (first Windows
connection only).
When this screen is displayed on the
z
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon.
z
Driver installation will begin.
z
After driver installation is complete, and
z
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
Windows: Access CameraWindow by
z
clicking [Downloads Images From Canon
Camera].
11
Import images.
Click [Import Images from Camera], and
z
then click [Import Untransferred Images].
Images are now saved to the Pictures
z
folder on the computer, in separate
folders named by date.
Click [OK] in the screen that is displayed
z
after image import is complete.
To view images you save to a computer,
z
use preinstalled or commonly available
software compatible with images
captured by the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 31) > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also change the camera nickname on the screen in
step 2 ( = 168).
● When the camera is connected to a computer, the camera screen
is blank.
● To disconnect from the camera, turn off the camera.
● The PIN code displayed when you choose [WPS (PIN mode)]
in step 6 is to be set in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user
manual included with your access point.
● Once a connection destination is assigned in Touch Actions
( = 127), you can automatically reconnect to a previous
destination simply by dragging across the screen with the
assigned gesture.
Before Use
][ ] buttons to Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
152