Subaru Legacy 2003 Service Manual page 20

FUEL INJECTION (FUEL SYSTEMS)
11) Connect PCV hose to intake manifold.
12) Connect spark plug cords to spark plugs.
13) Install power steering pump and tank on brack-
ets.
(1) Install power steering tank on bracket.
(2) Connect connector to power steering pump
switch.
(3) Tighten bolts which install power steering
pump on bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 16 ft-lb)
INTAKE MANIFOLD
(4) Install power steering pipes onto right side
intake manifold protector.
FU-00719
(5) Install front V-belt.
<Ref. to ME(H4SO)-42, INSTALLATION, V-
belt.>
(6) Install resonator chamber.
Tightening torque:
FU-00429
14) Connect accelerator cable (A).
<Ref. to SP(H4SO)-10, INSTALLATION, Accelera-
tor Control Cable.>
15) Connect cruise control cable (B). (With cruise
control models)
FU-00428
16) Install air intake duct and air cleaner assembly.
<Ref. to IN(H4SO)-7, INSTALLATION, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, INSTALLATION,
Air Cleaner Case.>
FU-00139
FU(H4SOw/oOBD)-18
33 N·m (3.4 kgf-m, 24.6 ft-lb)
( A )
( B )
FU-00718
FU-00261
FU-00715