Advance acoustic Protect II RIS User Manual page 45

Inner container and the deployment handle
When a PROTECT reserve parachute is fitted, the inner container and
the deployment handle should be carefully inspected by the packer –
especially the sewing, elastic loops, eyelets and release pins.
Note: Never tie the inner container to the parachute.
Compatibility check
After a first packing every new combination of reserve parachute and
harness must be tested by the harness manufacturer or a person
trained and appointed by him.
From the flying position deployment of the parachute must work with-
out a hitch, and comply with the guidelines of the manufacturer's ins-
tructions. It is a requirement that the force needed to free the reserve
does not exceed 7 kgs.
45