Installing The Reserve Parachute - Advance acoustic Protect II RIS User Manual

Installing the Reserve Parachute

PROTECT reserves are certified for all harnesses (see chapter
<Certification>). If the reserve is to be fitted into a harness outer con-
tainer all the installation parts should be carefully inspected by the
packer. The reserve must be attached to the harness by connecting
the harness bridle to the reserve bridle by means of a suitable screw
link (Maillon Rapide 7mm). The bridle ends should be stabilised at
each end of the maillon by O-rings. (Pic: Connection)
Note: Don't use sticky tape instead of O-rings.
44