Battery Packs; Removing And Replacing The Battery Pack On The Wireless Telephone - Avaya 3626 User Manual

Avaya 3626 Wireless Telephone, Desktop Charger and Gang Charger
with CCMS

Battery Packs

About Packs The Wireless Telephone will need to have its Battery Pack
Battery
Indications of Low
Battery
Caution

Removing and Replacing the Battery Pack on the Wireless Telephone

Removing the Battery
Pack
Replacing the Battery
Pack
Changing the Battery
Pack while in a call
Page 18
recharged periodically. The Nickel Metal Hydride (NiMH)
rechargeable Wireless Telephone Battery Pack gives you
four hours of talk time or 80 hours of stand-by time. Stand-
by time is when the phone is turned on, but not in an active
call.
The Wireless Telephone will notify you when the charge
on the Battery Pack is low by displaying the battery icon.
If you are in a call you will hear a soft beep through the
earpiece every six seconds. User has 15–30 minutes of
battery life left.
Not in call: The battery icon displays whenever the
Battery Pack charge is low. The message Low Battery and
a loud beep indicate a critically low Battery Pack charge.
These occur when the user is not in a call. The Wireless
Telephone will not work until the Battery Pack is charged.
Take care not to short the battery contacts on the Battery
Pack with metal objects such as coins, keys or paper clips.
Shorting the contacts can cause permanent damage.
To remove the Battery Pack press both battery release
buttons. The Battery Pack releases outward.
To replace the Battery Pack, slide the Battery Pack straight
into the cavity. You should not have to force it against the
Wireless Telephone.
The Battery Pack may be changed while the call is still in
progress. Do not press
Wireless Telephone. Perform the
quickly remove the discharged Battery Pack and replace
with a charged Battery Pack, then press
to turn the Wireless Telephone back on. The call
Call
should then be retrieved from its Parked state to rejoin the
conversation. Check with the switch administrator for
instruction on how to perform this or a similar
process on your particular telephone system.
Power Off/End Call
function and
Park Call
Power On/Start
on the
555-301-710
Issue 1